Views: 6
How to Upgrade Firmware for Milesight NVR IP Camera You can also click “Online Upgrade”, and click “Check” button to check the latest firmware version, then you can click “Upgrade” button to upgrade your NVR to the latest firmware version directly.
How to Upgrade Firmware for Milesight NVR
1. Choose Firmware
Note:
1) The second number of firmware stands for major version number, while the last two number means the minor version number. Take 71.7.0.5 for example, it means that the NVR’s major version is 7 and it’s minor version is 5.
2) You can use monitor to upgrade your NVR, or you can upgrade it via browser. If click the link to get the upgrade firmware failed, please copy the link to browser and open again.
3) If the firmware of your MS-N1009-UT begins with 61.X.X.X, or the SN begins with 12xxxxxxxxx, then use the 61.X.X.X.
If your MS-M1009-UT firmware begins with 71.X.X.X, or the SN begins with 13xxxxxxxxxx, then use the 72.X.X.X.
Read Next : How to Upgrade Firmware for Milesight IP Camera
2. Steps for Monitor
Step1: Enter upgrade menu by clicking “Main Menu”→“System Settings”→“Maintenance”→“Local Upgrade”.
Step2: Click ”Browse” button to search for files on your USB device and
select the corresponding firmware file.
Step3: Click “Upgrade” button to confirm the upgrade.
Step4: You can also click “Online Upgrade”, and click “Check” button to check the latest firmware version, then you can click “Upgrade” button to upgrade your NVR to the latest firmware version directly.
Note:
The upgrading process will take 5-10 minutes, please don’t disconnect power of the device during the process. The device will reboot automatically after upgrading.
Read Next : Milesight All software firmware download
3. Steps for WEB
3. Steps for WEB
Step1: “Settings”→“System”→“Maintenance”→“Local Upgrade”.
Step2: Click “Browse” and find the position where you downloaded
Note:
Remember to check the model, use the corresponding firmware for your model
Step3: After choosing the corresponding firmware, click “Upgrade” button to confirm the upgrade.
Step4: You can also click “Online Upgrade”, and click “Check” button to check the latest firmware version, then you can click “Upgrade” button to upgrade your NVR to the latest firmware version directly.
Note:
The upgrading process will take 5-10 minutes, please don’t disconnect power of the device during the process. The device will reboot automatically after upgrading.
4. Steps for Smart Tools
Step1:Use Milesight Smart Tools to search out this NVR according to its MAC address.
Step2:Click “Browse” and find the position where you downloaded
Step3: After choosing the corresponding firmware, click “Upgrade” button to confirm the upgrade.
Note:
You can also use Smart Tools to download the latest firmware.
“NVR Tools” – ”Upgrade” – ”Firmware Online”
The link for Smart Tools:
http://www.milesight.com/DownloadFile/Software/Smart_Tools/Milesight_Smart Tools_Setup.zip
How to Upgrade Firmware for IP Camera
1. Choose Firmware
Note:
1) Firmwares 10.5.0.110-r11 and 20.5.0.110-r11 are separately used for cameras MS-C2XXX and MS-3XXX which are without -A or -B in the model names, such as MS-C2182-P and MS-C3366-FPN;
2) Firmware 30.7.0.63-r20 is used for cameras with -A in the model names including MS-C2XXX-A and MS-3XXX-A, such as MS-C2182-PA and MS-C3366-FPNA;
3) Firmware 40.7.0.XX is used for cameras which use the firmware that the prefix of version number is 40 or 41;
4) Firmware 42.7.0.XX is used for cameras which use the firmware that the prefix of version number is 42 (For earlier MS-C8262-F(I)PB and MS-C9674-PB);
5) Firmware 43.7.0.XX is used for cameras which use the firmware that the prefix of version number is 43 (For MS-C8262-F(I)PB and MS-C9674-PB );
6) Firmware 43.7.0.XX -LPRX is used for LPR cameras which use the firmware that the suffix of version number is LPRX, such as LPR1, LPR2,LPR3;
7) If failed to get the upgrade firmware by clicking the link directly , please copy the link to browser manually;
8) To ensure that the firmware is fully available, the downloaded file will be a compressed package. Please manually extract it before importing to the File Path.
2. Key Steps after Downloading the Firmware
If the firmware you downloaded is 30.7.0.XX or 4X.7.0.XX, you can skip this part and directly go to 3.Upgrade Steps, otherwise please read below steps carefully.
Step1: If the current firmware version of your camera is above XX.5.0.85, like 10.5.0.89 or 20.5.0.90, you can go to 3.Upgrade Steps and upgrade your camera directly;
Step2: If the current firmware version of your camera is below XX.5.0.85, like 10.5.0.73 or 20.5.0.80, you should change the name of the firmware you downloaded according to the table below;
Take MS-C2651-PM for example:
Step1: According to the table above, it matches with MS-C2XXX, so we should download MSFImage_10.5.0.110_896a6b5b first.
Step2:
1) Suppose that the firmware version of this camera is XX.5.0.87 before upgrading, we can directly upgrade it according to 3.Upgrade Steps;
2) Suppose that the firmware version of this camera is XX.5.0.79, we should change the name of the firmware we downloaded. According to Table2, MS-C2651-PM belongs to model MS-C26XX and matches with 11.X.X.XX. So we need to change
MSFImage_10.5.0.110-r11_2e653e10 into MSFImage_11.5.0.110-r11_2e653e10
3. Upgrade Steps
Please check each model with right firmware version as mentioned above , then upgrade the firmware according to the following steps:
Step1: Go to the web of IP Camera, click “Configuration” -> “Maintenance” -> “Upgrade Firmware”
Step2: Browse and select files for the upgrade.
Step3: Click the “Upgrade” button and a progress bar will pop up, wait for about 1-3 minutes until it reaches 100%. After that, the system will reboot, and the firmware upgrade successfully.
Step4: Use Milesight Smart Tools to search out this camera according to its MAC address, and then change its IP into your local IP address. (The IP address will be kept after upgrading if the firmware versions are after XX.4.0.52).
You can also use Smart Tools to download the latest firmware.
“IPC Tools”-“Upgrade”-“Firmware Online”
The link for Smart Tools:
http://www.milesight.com/DownloadFile/Software/Smart_Tools/Milesight_Smart Tools_Setup.zip
Note:
1) If the current firmware version of the camera is below 10.5.0.73 and 20.5.0.73, like 10.5.0.68 or 20.4.0.51, please reboot the camera and restore it into factory settings via web before upgrading.
2) For the new version, you may need to re-install the ActiveX. During the installation, please close the browser, otherwise the ActiveX may not be installed correctly.
3) Please clear the cookies first after re-installing the new ActiveX(Press Shift+Ctrl+Delete to quick call the clear cookies windows).